-
andrew713
.User deleted
Sigma Software v.2.26.08. New models on board.
.................................................. .............HiSilicon Tab:
........Unlock, IMEI repair, Get bootloader code, FRP and ID remove,
.......Change provider (vendor/country) features supported for:
...........Huawei:
...........♦ Mediapad X2
...........♦ GEM-701L
...........♦ GEM-702L
...........♦ GEM-703L
...........♦ Honor Magic
...........♦ NTS-AL00
.................................................. ..............Qcom Tab:
........IMEI repair, Get bootloader code, FRP and ID remove,
.......Change provider (vendor/country) features supported for:
...........Huawei:
..........♦ Elate
...........♦ TOR-A1
...........♦ TOR-A2
.................................................. ........Android ADB Tab:
........1. New MTK smartphones in the list:
.............♦ Avvio 776 (MT6572)
...........♦ Blu Grand M (MT6580)
...........♦ BGH Joy X5 (MT6735)
...........♦ Lenovo A7020a48 (MT6755)
...........♦ LOGICOM L-EMENT 400 (MT6572)
...........♦ Micromax A102 (MT6572)
...........♦ Switel S4018D (MT6572)
...........♦ Tecno N9 (NT6735)
........2. We have fixed minor customer-reported issues.
.................................................. ...............MTK Tab:
........New MTK phones in the list:
.............♦ Lanix U200 (MT6261)
...........♦ Mobiwire c10 (MT6261)
Edited by Caldasunlockgsm - 3/10/2017, 12:50
. -
.
................................Sigma Software v.2.26.09
.................................................. ..............Qcom Tab:
........Released Unlock and IMEI repair features for new Alcatel models:
...........♦ Go Flip 2
...........♦ OT-4044
...........♦ OT-4044N
...........♦ OT-4044O
...........♦ OT-4044W. -
.
Sigma Software v.2.26.10
..............................
.................Released FLASH via fastboot mode feature for latest Huawei smartphones
...........................................based on Qualcomm and HiSilicon.
............This feature can be used for phones that won’t turn on, freeze on logo, etc.,
...........................................but still can enter fastboot mode.
........Procedure:
..........1. Connect the phone in fastboot mode (vol- power ON) to PC.
..........2. Select corresponding update.app firmware file and revive device with Sigma
........Benefits:
..........♦ Full/partial write of firmware partitions
..........♦ FAST direct firmware write via fastboot mode
..........♦ Flash of regular update.app files to devices with locked bootloader
..........♦ Possible to use original flash files from open sources, e.g. from here or here
.............This feature is available without limitations for all Sigma users with Pack3 activated.
.................................................. .................More soon!. -
andrew713 .
User deleted
Sigma v.2.26.11. Flash Huawei via Upgrade Mode
...................................1. Released flashing via UPGRADE MODE feature for
.................................Huawei smartphones based on Qcom and Hisilicon:
.............................♦ Press vol+vol- and then connect USB cable to enter the Upgrade mode
....................♦ Possible to use original update.app flash files from open sources, e.g. from here or here
............................Please use this method as a main method to flash Huawei smartphones.
.........................2. Released ENABLE DOWNGRADE feature (in Manufacture mode) for
................................Huawei smartphones based on Qcom/Hisilicon.
.................................................. ...............You may use it:
..................To downgrade phone’s firmware version - for example, downgrade from higher to lower one.
.....................To change phone’s localization (for example, to switch from Operator1 to Operator2).
.................................................. ...............How to do that:
....................................♦ Change provider settings (in manufacture mode)
.......................................♦ Enable downgrade (in manufacture mode)
...........................♦ Flash the phone with the firmware that fits the selected provider settings
......................................(Using upgrade mode: vol+vol-and powerON)
..................................................This solution is included into Pack 3 activation.
Edited by Caldasunlockgsm - 3/11/2017, 14:23. -
andrew713 .
User deleted
Sigma Software v.2.26.12
Released Remove FRP feature for the latest Motorola smartphones.
This service solution should work for all Android versions, including latest security patches.
Service manual available here
Edited by Caldasunlockgsm - 7/11/2017, 09:10. -
andrew713 .
User deleted
SigmaKey v2.26.13. REPAIR Huawei using Board Software
HiSilicon Tab:
Released REPAIR feature for bricked Huawei smartphones based on HiSilicon,
that still can be detected as VID12D1 PID3609 (HUAWEI USB COM 1.0) in the System.
Procedure:
1. Repair bricked device using board software file taken from Boot-Loader.com
2. Flash the device in Fastboot mode using update.app firmware
3. Repair Vendor/Country, IMEI and other numbers
4. Repeat flashing in Upgrade mode
using update.app firmware to finalize repair operation
You can find manuals and drivers here.
Board software files: Boot-Loader.com -> downloads -> Sigma -> Huawei -> Board software
Edited by Caldasunlockgsm - 15/11/2017, 12:44. -
.
Sigma Software v.2.26.14
HiSilicon Tab:
Released Unlock, IMEI repair, Get bootloader code, FRP and ID remove,
Change provider (vendor/country) features support for:
♦ RNE-L01
♦ RNE-L02
♦ RNE-L03
♦ RNE-L21
♦ RNE-L22
♦ RNE-L23
♦ RNE-AL00
♦ G10
♦ Nova 2i
♦ Honor 9i
♦ G10 Plus
♦ Mate 10 Lite
Android ADB Tab:
New MTK smartphones in the list:
♦ Alcatel OT-5011 (MT6580)
♦ AMGOO A527 (MT6735)
♦ ASUS X008 (MT6735)
♦ Bmobile AX921 (MT6580)
♦ GiONEE P5W (MT6580)
♦ LENOVO PB2-670Y (MT6753)
♦ Lenovo A678T (MT6582)
♦ Meizu m2 note (MT6753)
♦ Nyx Jak (MT6572)
♦ Sky Elite 5.0 M (MT6735)
♦ XIAOMI Hongmi (MT6589)
♦ X4 storm (MT6570)
♦ ZTE Blade A510 (MT6735)
♦ ZTE Blade A602 (MT6737)
Qcom Tab:
Repair IMEI / Remove FRP features support for:
♦ Vodafone Smart V8
♦ Vodafone 710
♦ VDF710
Full list of new ZTE devices tested:
♦ Blade A512
♦ Blade A506
♦ Blade A310
♦ Blade A6
♦ Blade S7
♦ Blade V8
♦ Conexis X1
♦ Maven Z812
♦ Orange Neva 80
♦ Overture 2
♦ T920
♦ Turkcell T70
♦ Turkcell T80
♦ A0621
♦ Z813
♦ Z982
Flash File Area Update:
59 GB of Board flash files for Huawei devices uploaded to flash file area at Boot-Loader.com
This is just the beginning. We will add much more files soon.. -
.
Sigma Software v.2.26.15
HiSilicon Tab:
1. Released REPAIR feature for new type of Huawei smartphones:
♦ Honor V9
♦ MATE 9
♦ P10 Plus
♦ P10
♦ Mate 9 Pro
♦ Honor 9
Device should to be detected as VID12D1 PID3609 (HUAWEI USB COM 1.0)
in the System to be flashed using board software files.
You can find manuals and drivers here.
2. Increased speed for some operations in Fastboot mode
Android ADB Tab:
New MTK smartphones in the list:
♦ Lenovo K50a40 (MT6752)
♦ OPPO X9009 (MT6755). -
.
Sigma Software v.2.26.16
HiSilicon Tab:
Added possibility to flash Huawei Factory flash files via fastboot mode
♦ This feature is applicable only for flashing Factory Firmware files in FastBoot mode
(NOT for factory fastboot and not for HUAWEI USB COM 1.0 cases)
♦ For advanced users only!
Procedure:
1. Set the phone to fastboot mode
2. Select Factory Flash File
3. Tick the box “Authorize”
4. Flash the Factory Flash File. -
andrew713 .
User deleted
Sigma Software v.2.26.17 REPAIR feature for bricked Qualcomm Huawei smartphones
Sigma Software v.2.26.17
Qcom Tab:
1. Released REPAIR feature for bricked Qualcomm Huawei smartphones
using board software files:
♦ G9 Lite / VNS-AL00
♦ Y6 / SCL-L21 / SCL-U23
♦ Honor 6A / DELHI-AL10A
♦ MediaPad T3 / KOB-W09
♦ MediaPad T3 10 / AGS-L03
♦ WATCH 2 / Leo-B09
Procedure:
1. Repair bricked device using board software file taken from boot-loader.com
• Please read the manual carefully, because there are some differences between
Qualcomm and HiSilicon groups!
• Board software files:
boot-loader.com -> Downloads -> Sigma -> Huawei -> Board software
2. Flash the device in Fastboot mode using update.app firmware
3. Repair Vendor/Country, IMEI and other numbers
4. Repeat flashing in Upgrade mode using update.app firmware to finalize
repair operation. -
andrew713 .
User deleted
Sigma Software v.2.27.00
Qcom Tab:
Released REPAIR feature for new group of bricked Qualcomm Huawei smartphones
using board software files:
♦ Ascend G620S
♦ Ascend G630
♦ Ascend G6
♦ Ascend G7
♦ Ascend Mate2
♦ Ascend Y530
♦ Ascend Y635
♦ Ascend G660
♦ Ascend G730
♦ G8
♦ GR5
♦ Honor 4
♦ Honor 5X
♦ Honor 7i
♦ MediaPad T2 10.0 Pro
♦ MediaPad T1A21L
♦ MediaPad T1 10
♦ ShotX
You can find detailed info about flashing in the Factory mode here.
Some users flashed Huawei phones using Factory firmware in a “Full flashing” mode.
As a result all areas were flashed, including factory calibrations areas.
After flashing factory areas, phone’s network and other functions became unavailable.
To meet the needs of our users and to prevent the above mentioned situations,
we have made some changes in Sigma.
From now on, when selecting Full flashing mode,
you will have to additionally select factory calibrations areas.
Soon we will release Repair files for some models
to restore the phone’s operation after the above mentioned cases.
Card update is required.. -
andrew713 .
User deleted
Sigma Software v.2.27.02
QCOM Tab:
Added FRP remove feature support for:
♦ ZTE Maven 2 / Z831
♦ ZTE Sonata 3 / Z832
♦ ZTE Maven 3 / Z835
Other devices are potentially supported (with a very high probability)
Potentially supported ZTE devices (FRP remove feature):
♦ Avid 4
♦ Avid 916
♦ Avid Plus
♦ Blade A520
♦ Blade Bantage
♦ Blade A6 lite
♦ Blade A460
♦ Blade A521
♦ Blade A462
♦ Blade A506
♦ Citrine
♦ Chat
♦ Fanfare 3
♦ Blade A330
♦ Overture 3
♦ Prelude +
♦ Tempo X
♦ Libero 2
♦ Grand X View
♦ Jasper
♦ Majesty Pro
♦ Zmax Grand
♦ Zmax Champ
♦ Zfive L
♦ Prestige 2
♦ Tempo
♦ Prestige
♦ Zpad 8
How to:
Open Qcom -> Service tab and select ZTE model from the drop-down menu. Connect the phones in FTM mode.
We welcome you to test new devices, and share your experience with us.
Android ADB Tab:
New MTK smartphones in the list:
♦ Boost Luna (MT6572)
♦ Lanix X520 (MT6580)
♦ Sendtel Wink (MT6572)
♦ Pcd Pl5001 (MT6735)
♦ SafetyNet Modelrive II (MT6572)
♦ Verykool S5525 (MT6580)
♦ ZTE B815 (MT6572). -
andrew713 .
User deleted
Sigma Software v.2.27.03. New devices in the list
Sigma Software v.2.27.03
MTK Tab:
MTK Calculator (unlock by IMEI and PID for Alcatel phones) has been updated
for the following models:
♦ OT-4034, OT-4034D, OT-4034E, OT-4034F, OT-4034G, OT-4034M, OT-4034N
♦ OT-5010, OT-5010D, OT-5010E, OT-5010G, OT-5010S, OT-5010U
♦ OT-5012, OT-5012F, OT-5012G
♦ OT-5015D
♦ OT-5025, OT-5025D, OT-5025E, OT-5025G
♦ OT-5026, OT-5026D
♦ OT-5042T
♦ OT-5044P
♦ OT-5047I
♦ OT-5085, OT-5085B, OT-5085D, OT-5085I, OT-5085J, OT-5085N,
OT-5085Q, OT-5085Y
♦ OT-5144, OT-5144O
♦ OT-7071, OT-7071D
♦ OT-8050, OT-8050D, OT-8050E, OT-8050G, OT-8050J
♦ OT-9003
♦ OT-9008, OT-9008D, OT-9008I, OT-9008J, OT-9008N, OT-9008T
♦ OT-9026, OT-9026S, OT-9026T
♦ OT-9108
♦ OT-9203
♦ OT-D820
♦ OT-V300, OT-V301, OT-V502, OT-V610
♦ VF1100, VF1296, VF1300
2900 new PIDs added for the above MTK phones
QCOM Tab:
1. Added FRP remove feature support for:
♦ Moto X4 XT1900
♦ ZTE Grand X3 Z959
2. Released Unlock, FRP unlock and IMEI repair for new Alcatel models (test mode):
♦ OT-A576RW
♦ OT-5044C
♦ OT-9024W
Android ADB Tab:
1. New MTK smartphones in the list:
♦ Alcatel 4049G (MT6570)
♦ AMGOO AM527 (MT6735)
♦ Avvio 550 Pro (MT6735)
♦ Swissmobility PRA557 (MT6735)
♦ LENOVO Lenovo TB3-730X (MT8735)
♦ Vestel Venus V3 5020 (MT6735)
♦ Vodafone VFD 100 (MT6572)
♦ Vodafone VFD 700 (MT6755)
♦ ZTE A112 (MT6735)
2. We have fixed minor customer-reported issues. -
andrew713 .
User deleted
Sigma Software v.2.27.06. FRP remove for new ZTE smartphones
Sigma Software v.2.27.06
QCOM Tab:
1. Added Remove FRP for the following devices:
♦ ZTE Blade A521
♦ ZTE Prestige N9132
♦ ZTE Blade A310
♦ ZTE Blade A320
♦ ZTE Tempo N9131
♦ ZTE Libero 2 602ZT
♦ ZTE Blade A506
♦ FNB ConeXis X1
♦ ZTE Blade S7 T920
♦ ZTE Blade S6 Plus
♦ ZTE Blade S6
Open Qcom -> Service tab and select ZTE model from the drop-down menu.
Connect the phone in FTM mode
2. We added Remove FRP operation (in a test mode) for the following devices:
♦ LYF
♦ ZTE Axon 8 A2018
♦ ZTE A0620
♦ ZTE Blade S6
♦ ZTE Axon 7 Max C2017
♦ ZTE Spark R84
♦ ZTE Axon 7 A2017
♦ ZTE Blade A460
♦ ZTE Axon 7 Mini B2017G
♦ ZTE Axon Max C2016
♦ ZTE Tempo X N9137
If Remove FRP operation fails for test models, try selecting other ZTE model from the list and repeat operation.
3. Added Remove FRP feature support for:
♦ Moto E4 Plus Xt1768
♦ Moto E4 XT1767
♦ Moto G5 Plus XT1681
♦ Moto G5 Plus XT1687. -
andrew713 .
User deleted
Sigma Software v.2.27.07
Sigma Software v.2.27.07
HiSilicon Tab:
Released Remove Huawei ID, Get bootloader code features for Huawei:
♦ MATE 10 / ALP-AL00 / ALP-TL00 / ALP-L09 / ALP-L29
♦ MATE 10 PRO / BLA-A09 / BLA-L09 / BLA-L29 / BLA-TL00 / BLA-AL00
♦ Honor V10 / BKL-AL00 / BKL-AL20 / BKL-TL00 (in a test mode)
Android ADB Tab:
New MTK smartphones in the list:
♦ Mobiwire Sakari (MT6572)
♦ Verykool S5025 (MT6580)
QCOM Tab:
Added Remove FRP operation for the following ZTE devices:
♦ Axon 7 Mini
♦ B2017G.
FORO EXCLUSIVO UPDATES SIGMA KEYSolo Actualizaciones |
