|
|
|
Medusa PRO v.1.4.9 Release Notes:
Octoplus JTAG PRO Software v.1.4.9 Release Notes:
- Added support for the following models via eMMC:
LG LS740 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G800F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
- Added support for the following models via USB:
Alcatel OT-5051D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Alcatel OT-5051X - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Alcatel OT-5056E - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Alcatel OT-6044D - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Lenovo K33a48 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Lenovo P1a42 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Lenovo P2c72 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Lenovo ZUK Z2 Z2131 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
ZTE N939Sc - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
- Added new Qualcomm USB loaders for the next devices (Read/Write/Full erase operations are supported):
Huawei - for MSM8936 and MSM8952
ZTE - for MSM8936, MSM8952, MSM8953, MSM8976, MSM8994 and MSM8996
- Improved procedures of sending USB loaders and connecting.
- Changes and improvements in Partition Manager:
"Open File" button allows you to open full flash file, red from phone (img file), select required partitions and write them to the phone, or select any file instead of partition in table, which will be written accordingly to partitions table; also you can select a file which contains only partitions table and then select files corresponding to each partition in table. If eMMC chip is not connected - read/write operations are not available
"Connect" button from now on connects target device, but doesn't read partitions table. It will change its state to "Read from device", what allows you to perform partitions search, parsing and further operations in designated window, if eMMC chip is connected properly
While eMMC chip is connected, "Save partitions" reads data from memory, "Write partitions" writes present partitions accordingly from image or files opened
You have to reconnect target device after each write operation to see the changes. "Disconnect" button added for this purpose
"Hex editor" allows to change data directly in memory or file opened, accordingly to selected target
- Some log changes were made.
- Uploaded new “Live logs” into the Support Area.
- All pinouts and repair procedures are described in the manual ("Help" button in the software).
|
|
.
.
